FixVault
Home › Toyota › 2002 › Tacoma Base, 4D Pickup › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Body Control Systems - Diagnostics › Circuit Inspection › Key Unlock Warning Switch Circuit › Inspection Procedure

Inspection Procedure

  1. Check key unlock warning switch. See  INSPECTION  . 
    1. NG: Replace faulty key unlock warning switch. 
    2. OK: GO TO NEXT STEP. 
  2. Check for wire harness and connector between key unlock warning switch and body ECU. See  LOCATION  . 
    1. NG: Repair or replace wire harness or connector. 
    2. OK: Proceed to next circuit inspection shown in problem symptoms table. See  PROBLEM SYMPTOMS TABLES  . 
About FixVault