Torque Specification
Engine Mechanical Torque Specification
| Part Tightened | N.m | Kgf.Cm | Ft. Lbs |
|---|---|---|---|
| Cylinder Head Cover No. 2 To Cylinder Head Cover Sub-Assy | 7.0 | 71 | 62 INCH Lbs. |
| Camshaft Bearing Cap No. 3 To Cylinder Head Sub-Assy | 13 | 133 | 10 |
| Camshaft Bearing Cap No. 1 To Cylinder Head Sub-Assy | 23 | 235 | 17 |
| Camshaft Timing Gear Or Sprocket To Camshaft No. 2 | 54 | 551 | 40 |
| Chain Tensioner Assy No. 1 To Timing Chain Or Belt Cover Sub-Assy | 9.0 | 92 | 80 INCH Lbs. |
| V-Ribbed Belt Tensioner Assy To Cylinder Block Sub-Assy | 69 | 704 | 51 |
| V-Ribbed Belt Tensioner Assy To Cylinder Head Sub-Assy | 29 | 296 | 21 |
| Engine Mounting Insulator RH To Body | 52 | 530 | 38 |
| Engine Mounting Insulator RH To Transverse Engine Engine Mounting Bracket | 52 | 530 | 38 |
| Cylinder Head Cover Sub-Assy To Cylinder Head Sub-Assy: A | 11 | 112 | 8 |
| Cylinder Head Cover Sub-Assy To Cylinder Head Sub-Assy: B | 9.0 | 92 | 80 INCH Lbs. |
| Cylinder Head Cover Sub-Assy To Timing Chain Or Belt Cover Sub-Assy | 11 | 112 | 8 |
| Engine Wire To Cylinder Head Cover Sub-Assy | 9.0 | 92 | 80 INCH Lbs. |
| Ignition Coil Assy To Cylinder Head Cover Sub-Assy | 9.0 | 92 | 80 INCH Lbs. |
| Engine Hanger To Cylinder Head Cover Sub-Assy | 38 | 387 | 28 |
| Radio Setting Condenser To Cylinder Head Sub-Assy | 10 | 102 | 7 |
| E.F.I. Engine Coolant Temperature Sensor To Cylinder Head Sub-Assy | 20 | 204 | 15 |
| Exhaust Manifold To Cylinder Head Sub-Assy | 37 | 377 | 27 |
| Exhaust Manifold Heat Insulator No. 1 To Exhaust Manifold | 18 | 184 | 13 |
| Manifold Stay To Exhaust Manifold | 49 | 500 | 36 |
| Manifold Stay To Cylinder Block Sub-Assy | 49 | 500 | 36 |
| Transverse Engine Engine Mounting Bracket To Timing Chain Or Belt Cover Sub-Assy | 47 | 479 | 35 |
| Knock Control Sensor To Cylinder Block Sub-Assy | 20 | 204 | 15 |
| Crank Position Sensor To Timing Chain Or Belt Cover | 9.0 | 92 | 80 INCH Lbs. |
| Crank Position Sensor No. 1 To Cylinder Head Sub-Assy | 9.0 | 92 | 80 INCH Lbs. |
| Water Inlet To Cylinder Block Sub-Assy | 11 | 112 | 8 |
| Water By-Pass Pipe No. 1 To Cylinder Block Sub-Assy | 9.0 | 92 | 80 INCH Lbs. |
| Water By-Pass Pipe No. 1 To Cylinder Head Sub-Assy | 9.0 | 92 | 80 INCH Lbs. |
| Oil Level Gage Guide To Water By-Pass Pipe No. 1 | 13 | 133 | 10 |
| Intake Manifold To Cylinder Head Sub-Assy | 30 | 306 | 22 |
| Flywheel Sub-Assy To Crankshaft: 1st | 49 | 500 | 36 |
| Flywheel Sub-Assy To Crankshaft: 2nd | Turn 90° | Turn 90° | Turn 90° |
| Drive Plate & Ring Gear Sub-Assy To Crankshaft | 88 | 897 | 65 |
| Transverse Engine Engine Mounting Bracket Front To Transverse Engine Engine Mounting Insulator Front | 52 | 530 | 38 |
| Transverse Engine Engine Mounting Bracket Rear To Transverse Engine Engine Mounting Insulator Rear | 87 | 887 | 64 |
| Transverse Engine Engine Mounting Bracket LH To Transverse Engine Engine Mounting Insulator LH | 80 | 816 | 59 |
| Transverse Engine Engine Mounting Bracket RH To Transverse Engine Engine Mounting Insulator RH | 52 | 530 | 38 |
| Front Suspension Crossmember Sub-Assy To Body Front | 113 | 1,152 | 83 |
| Front Suspension Crossmember Sub-Assy To Body Rear | 157 | 1,601 | 116 |
| Engine Mounting Member Sub-Assy Center To Body | 39 | 398 | 29 |
| Floor Panel Brace Front To Body | 30 | 306 | 22 |
| Return Tube Sub-Assy To Body: Bolt A | 5.0 | 51 | 44 INCH Lbs. |
| Return Tube Sub-Assy To Body: Bolt B | 7.8 | 80 | 69 INCH Lbs. |
| Cruise Control Actuator To Cruise Control Bracket | 6.0 | 61 | 53 INCH Lbs. |
| Air Cleaner Case To Body | 7.0 | 71 | 62 INCH Lbs. |
| Air Cleaner Case To Transverse Engine Engine Mounting Bracket Lh | 7.0 | 71 | 62 INCH Lbs. |
| Battery Carrier To Body | 13 | 133 | 10 |
| Battery Clamp Sub-Assy To Body | 5.0 | 51 | 44 INCH Lbs. |
| Battery Clamp Sub-Assy To Battery Clamp Bolt | 30 - 4.0 | 31 - 41 | 27 - 35 INCH Lbs. |
| Radiator Support Upper To Body | 19 | 194 | 14 |
| Front Wheel RH & LH To Front Axle Hub Sub-Assy RH & LH | 103 | 1,050 | 76 |
| Oil Strainer Sub-Assy To Cylinder Block Sub-Assy | 9.0 | 92 | 80 INCH Lbs. |
| Oil Pan Sub-Assy To Cylinder Block Sub-Assy | 9.0 | 92 | 80 INCH Lbs. |
| Oil Pan Drain Plug To Oil Pan Sub-Assy | 37 | 377 | 27 |
| Camshaft Timing Gear Assy To Camshaft | 54 | 551 | 40 |
| Oil Control Valve Filter To Cylinder Head Sub-Assy | 30 | 306 | 22 |
| Oil Pump Assy To Cylinder Block Sub-Assy | 9.0 | 92 | 80 INCH Lbs. |
| Timing Chain Cover Sub-Assy To Stud Bolt | 5.0 | 51 | 44 INCH Lbs. |
| Water Pump Assy To Timing Chain Cover Sub-Assy: A | 9.0 | 92 | 80 INCH Lbs. |
| Water Pump Assy To Timing Chain Cover Sub-Assy: B | 11 | 112 | 8 |
| Spark Plug To Cylinder Head Sub-Assy | 25 | 255 | 18 |
| Ventilation Valve Sub-Assy To Cylinder Head Cover Sub-Assy | 30 | 306 | 22 |
| Chain Tensioner Slipper To Cylinder Block Sub-Assy | 19 | 194 | 14 |
| Timing Chain Or Belt Cover Sub-Assy To Cylinder Head Sub-Assy | 13 | 133 | 10 |
| Timing Chain Or Belt Cover Sub-Assy To Cylinder Block Sub-Assy: M6 | 19 | 133 | 10 |
| Timing Chain Or Belt Cover Sub-Assy To Cylinder Block Sub-Assy: M8 | 19 | 194 | 14 |
| Crankshaft Pulley To Crankshaft | 138 | 1,407 | 102 |
| Cylinder Head Sub-Assy To Cylinder Block Sub-Assy: 1st | 49 | 500 | 36 |
| Cylinder Head Sub-Assy To Cylinder Block Sub-Assy: 2nd | Turn 90° | Turn 90° | Turn 90° |
| Camshaft Timing Oil Control Valve Assy To Cylinder Head Sub-Assy | 9.0 | 92 | 80 INCH Lbs. |
| Chain Vibration Damper No. 1 To Cylinder Head Sub-Assy | 9.0 | 92 | 80 INCH Lbs. |
| Chain Vibration Damper No. 1 To Cylinder Block Sub-Assy | 9.0 | 92 | 80 INCH Lbs. |
| Cylinder Head Sub-Assy To Stud Bolt: A, D And E | 9.5 | 97 | 84 INCH Lbs. |
| Cylinder Head Sub-Assy To Stud Bolt: B And C | 5.0 | 51 | 44 INCH Lbs. |
| W/ Head Taper Screw Plug No. 2 To Cylinder Head Sub-Assy | 44 | 449 | 33 |
| Cylinder Block Sub-Assy To Stud Bolt: A, C, D And E | 5.0 | 51 | 44 INCH Lbs. |
| Cylinder Block Sub-Assy To Stud Bolt: B | 11 | 112 | 8 |
| Crankshaft Bearing Cap To Cylinder Block Sub-Assy: 1st | 44 | 449 | 33 |
| Crankshaft Bearing Cap To Cylinder Block Sub-Assy: 2nd | Turn 90° | Turn 90° | Turn 90° |
| Crankshaft Bearing Cap To Cylinder Block Sub-Assy: Others | 19 | 194 | 14 |
| Connecting Rod Cap To Connecting Rod | 20 | 204 | 15 |
| Cylinder Block Water Drain Cock Sub-Assy To Cylinder Block Sub-Assy | 25 | 255 | 18 |