Starter Specifications
WARNING: This page is about a different car, the 2004 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
STARTER SPECIFICATIONS
| Application | Specification | ||
|---|---|---|---|
| Brush | |||
| Resistance Between Positive & Negative | 10,000 Ohms Or More | ||
| Length | |||
| Standard | .354 Inch (9 mm) | ||
| Minimum | .157 Inch (4 mm) | ||
| Commutator | |||
| Resistance | |||
| Maximum Between Segments | Less Than One Ohm | ||
| Commutator To Core | 10,000 Ohms Or More | ||
| Length | |||
| Maximum | .150 Inch (3.8 mm) | ||
| Specified | .122 Inch (3.1 mm) | ||
| Snap Ring End Gap | .197 Inch (5 mm) | ||