Torque Specification: 2AZ-FE

STARTING & CHARGING SYSTEM TORQUE SPECIFICATION (2AZ-FE)

Part Tightened			N.m	Kgf.cm	In.Lbs
Starter Assy
	Starter Assy At Engine		39	398	29 Ft.Lbs
	Starter Wire At Terminal 30 Of Starter		13	130	9 Ft.Lbs
	Starter Commutator End Frame Assy At Starter Brush Holder Assy		1.5	15	13
	Starter Housing At Magnet Starter Switch Assy		5.9	60	52
	Starter Commutator End Frame Assy, Starter Yoke Assy At Starter Housing		5.9	60	52
	Lead Wire Of Starter Yoke At Terminal 30 Of Magnet Starter Switch		5.9	60	52
Generator Assy (100A)
	Generator Assy At Engine
		M8	21	214	15 Ft.Lbs
		M10	52	530	38 Ft.Lbs
	Wire Harness Clamp		8.4	85	74
	Generator Wire At Generator Assy		9.8	100	7 Ft.Lbs
Generator Rectifier End Frame At Drive End Frame :
		W/ Cord Clip	5.4	55	47
		W/O Cord Clip	4.5	46	39
	Generator Rectifier Holder At Coil Lead On Generator Rectifier End Frame		2.9	30	26
	Voltage Regulator At Generator Rectifier End Frame		2.0	20	18
	Generator Brush Holder At Generator Rectifier End Frame		2.0	20	18
	Rear End Cover At Generator Rectifier Holder		4.4	45	39
	Plate Terminal At Generator Rectifier Holder		3.9	39	35
	Terminal Insulator At Generator Rectifier Holder		4.1	42	36
	Generator Pulley At Generator Rotor		111	1,125	81 Ft.Lbs
Generator Assy (130A)
	Generator Assy At Engine
		M8	21	214	15 Ft.Lbs
		M10	52	530	38 Ft.Lbs
	Wire Harness Clamp		8.4	85	74
	Generator Wire At Generator Assy		9.8	100	7 Ft.Lbs
	Generator Coil Assy At Drive End Frame		5.8	59	74
	Generator Brush Holder At Generator Rectifier End Frame		1.8	18	16
	Rear End Cover At Generator Rectifier Holder		4.6	47	41
	Generator Pulley At Generator Rotor		111	1,125	81 Ft.Lbs