Radar Sensor Off Mode
THE RADAR SENSOR CAN BE DEACTIVATED. PERFORM THE FOLLOWING: PUSH THE SENSOR OFF SWITCH ON THE INSTRUMENT PANEL BEFORE ARMING BY KEY OR REMOTE CONTROL.
IMMOBILIZER LED STARTS BLINKING.
ARM THE SYSTEM WITH THE REMOTE CONTROL OR KEY WHILE THE IMMOBILIZER LED IS BLINKING.
THE RADAR SENSOR WILL DEACTIVATE DURING ARMING.
NOTE:
IF YOU DISARM THE SYSTEM AFTER YOU SET THE RADAR SENSOR OFF, YOU HAVE TO REPEAT THE ABOVE PROCEDURE WHEN YOU ARM THE SYSTEM IF YOU WANT TO DEACTIVATE THE RADAR SENSOR AGAIN. THE SYSTEM WILL AUTOMATICALLY CANCEL THE RADAR SENSOR OFF MODE WHEN DISARMED.