FixVault

Front Seat: Disassembly

HINT:

Tape the screwdriver tip before using it to pry parts.

  1. REMOVE FRONT SEAT 
    1. Remove the 4 bolts and disconnect the connectors.
    2. Remove the front seat.
      NOTE: Be careful not to damage the body.
  2. W/ Vertical adjuster: 

    REMOVE VERTICAL ADJUSTER KNOB 

    Using a screwdriver, remove the clip and vertical adjuster knob.

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE 

    Using a screwdriver, remove the reclining adjuster release handle.

    Fig 1: Removing Reclining Adjuster Release Handle
    G02837911Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE FRONT SEAT CUSHION SHIELD 

    Remove the front seat cushion shield as shown in the illustration.

    Fig 2: Removing Front Seat Cushion Shield
    G02837912Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE FRONT SEAT CUSHION INNER SHIELD 

    Remove the screw and front seat cushion inner shield as shown in the illustration.

  6. REMOVE FRONT SEAT INNER BELT 
    1. Cut off the clamp and connector.
    2. Remove the bolt and front seat inner belt.
  7. REMOVE SEAT CUSHION ASSEMBLY 
    1. Remove the 4 bolts and seat cushion assembly.
    2. Remove the hog rings.
      Fig 3: Removing Screw And Front Seat Cushion Inner Shield
      G02837913Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the seat cushion cover hooks and remove the seat cushion frame.
    4. Remove the hog rings between the seat cushion cover and seat cushion pad.
    5. Remove the seat cushion cover from the seat cushion pad.
  8. REMOVE SEATBACK ASSEMBLY 
    1. Remove the hog rings.
    2. Turn over the seatback cover.
    3. Remove the 4 bolts and seatback assembly
    4. Remove the hog rings between the seat back cover and the seatback pad.
    5. Remove the seatback cover and the seatback pad from the seatback frame.
  9. REMOVE SEAT TRACK HANDLE 

    Using a screwdriver, remove the seat track handle.

  10. REMOVE RECLINING CONNECTING PIPE 
  11. DISASSEMBLE OUTER AND INNER TRACK 
    1. Using a screwdriver, remove the E-ring.
    2. Disassemble the outer track and inner track.
      Fig 4: Removing Seat Track Handle
      G02837914Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002