Back Door Stay Assembly LH: Replacement

HINT:

• Installation is in the reverse order of the removal. But, the installation is indicated only when it has a point.
• In the RH side, work in the same procedure as in the LH side.

1. REMOVE BACK DOOR STAY ASSY LH 
   1. Using a screwdriver, remove the back door stay from the back door panel.
   Fig 1: Removing Back Door Stay From Back Door Panel
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Remove the 2 bolts and back door stay with the stay bracket from the body.

      HINT:

      While supporting the back door with your hand, remove the back door stay.

   3. Using a screwdriver, remove the back door stay from the bracket.
   Fig 2: Removing Back Door Stay From Bracket
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL BACK DOOR STAY ASSY LH 
   1. Install the back door stay with the 2 bolts.

      Torque: 7.0 N.m (71 kgf.cm, 62 in.lbf)