Cruise Control Failure Warning

WARNING: This page is about a different variant/trim than selected.

NOTE: A flashing cruise control light may indicate a Diagnostic Trouble Code (DTC). The DTC is derived by counting short flashes in between the long pauses. See Fig 3.

If the cruise control light in the instrument panel flashes, see Fig 2, when using the cruise control, press the "CRUISE ON-OFF" button, see Fig 1, to turn the system off and then press it again to turn it on.

If any of the following conditions then occurs, there is some trouble in the cruise control system.

The indicator light does not come on.
The indicator light flashes again.
The indicator light goes out after it comes on.

Fig 1: Identifying Cruise Control On & Off Button

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Identifying Cruise Main Indicator Light

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 3: Reading DTCs Output By Flashes Of Cruise Indicator Light

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 4: Identifying Set/Coast Setting

Fig 5: Identifying Res/Acc Setting

Fig 6: Identifying Cancel Switch