Inspection Procedure
WARNING: This page is about a different car, the 2002 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
- Check door lock motor
. See steps 6-10
of INSPECTION
.
- NG : Replace the door lock motor.
- OK : Go to step 2.
- Check wire harness and connector between door lock motor and Body ECU.
. See
HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS
.
- NG : Repair or replace wire harness or connector.
- OK : Proceed to next circuit inspection shown in problem symptoms. See PROBLEM SYMPTOMS .