FixVault
Home › Toyota › 2003 › Matrix Base, FWD, Standard › Repair and Diagnosis › External Pages › Different car › Section 41 (Manual A/C-Heater Systems) › Blower Unit › Disassembly

Blower Unit: Disassembly

WARNING: This page is about a different car, the 2002 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove blower motor.
    1. Remove the 3 screws and blower motor.
  2. Remove air inlet servomotor.
    1. Remove the 3 screws and servomotor.
About FixVault