Rear Wheel Alignment (Fwd): Inspection
- INSPECT TIRE (See INSPECTION )
- MEASURE VEHICLE HEIGHT (See
ADJUSTMENT
) NOTE: Before inspecting the wheel alignment, adjust the vehicle height to the specified value.
- INSPECT TOE-IN TOE-IN SPECIFICATION
Toe-in (total) A + B: 0° 16' +/- 16' (0.26° +/- 0.26°) Toe-in (total) C - D: 2.8 +/- 2.7 mm (0.11 +/- 0.11 in.) If the toe-in is not within the specified value, inspect and replace the suspension parts as necessary.
- INSPECT CAMBER
- Install the camber-caster-kingpin gauge or position vehicle on wheel alignment tester.
- Inspect the camber.
Camber:
CAMBER SPECIFICATIONCamber Right-left error -1° 27' +/- 30' (-1.45° +/- 0.5°) Camber Right-left error 30' (0.5°) or less If the measured value is not within the specified value, inspect the suspension parts for damage and/or wear and replace them if necessary become camber is not adjustable.