Section 452 (Front Brake Speed Sensor): Removal

WARNING: This page is about a different car, the 2004 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

TURN OVER FENDER LINER
REMOVE SPEED SENSOR
1. Disconnect the sensor connector from the sensor harness.
2. Remove the sensor connector from the body.
3. Remove the harness clamp from the body.
4. Remove the 4 bolts and sensor.
  Torque:
  
  Bolt A: 5.0 N.m (52 kgf.cm, 41 in.lbf)
  
  Bolt B: 8.0 N.m (82 kgf.cm, 71 in.lbf)
  
  Bolt C: 18.5 N.m (189 kgf.cm, 14 ft.lbf)
  
  Fig 1: Removing Speed Sensor & Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002