Section 361 (Combination Meter): Disassembly
WARNING: This page is about a different car, the 2003 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE COMBINATION METER COVER
Remove combination meter glass and meter plate.
- REMOVE MULTI INFORMATION DISPLAY (W/O NAVIGATION SYSTEM)
- Remove the circuit plate.
- Disconnect the connector.
- Remove the multi information display glass and plate.
- Remove the 2 screws.
- Disconnect the cold cathode tube with plate.
- Remove the 6 screws.
- Remove the multi information display.
- Remove the 2 screws.
- Remove the No. 2 multi information display.
- REMOVE MULTI INFORMATION DISPLAY (W/ NAVIGATION SYSTEM)
- Remove the circuit plate.
- Disconnect the connector.
- Remove the 2 screws.
- Remove the multi information display glass.
- Remove the 2 screws.
- Remove the multi information display plate.
- Remove the 8 screws.
- Remove the 2 screws and center display computer No. 2.
- Remove the 3 screws and the plate.
- Remove the connector and multi information display.
- Remove the 2 screws and multi information computer.
- Remove the accessary meter cover.