Terminals Of Ecu

INSPECT TVIP ECU

Fig 1: Identifying Terminals Of ECU
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Inspect the ECU-B, DOME and ECU-IG fuses.
2. Disconnect the TVIP ECU connector, and the continuity and voltage of check each terminal of the disconnected connector.
  Standard:
  
  Fig 2: Terminal Condition Reference Chart
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  If the result is not as specified, the vehicle's side may malfunction.
3. Reconnect the TVIP ECU connector, and the continuity and voltage of check each terminal of the disconnected connector.
  Standard:
  
  Fig 3: Terminal Condition Reference Chart
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  If the result is not as specified, the TVIP ECU may malfunction.

INSPECT INTEGRATION RELAY

Fig 4: Identifying Integration Relay

G02861119

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Disconnect the connector and check the continuity of each terminal of the disconnected connector.

TERMINAL CONDITION SPECIFICATION

Symbols (Terminal No.)	Wiring color	Condition	Specified Condition
PCTY (I11-13) <=> Body ground	R-W <=> Body ground	Passenger's door fully closed --> Opened	No continuity --> Continuity

If the result is not as specified, the vehicle's side may malfunction.

INSPECT INSTRUMENT PANEL J/B (INTEGRATION RELAY)

Fig 5: Identifying Instrument Panel J/B (Integration Relay)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Inspect the DOOR fuse.
2. Disconnect the ID connector of the instrument panel J/B, and check the continuity of each terminal of the disconnected connectors.
  Standard:
  
  Fig 6: Terminal Condition Reference Chart
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  If the result is not as specified, the vehicle's side may malfunction.