Speedometer Sensor (ATM): Replacement

1. Disconnect the connector.
2. Remove the bolt and speedometer sensor assembly.
3. Remove the clip and driven gear from the speedometer sensor.

1. Coat a O-ring with ATF and install it to the speedometer sensor.
2. Install the driven gear to the speedometer sensor with the clip.
3. Install the speedometer sensor assembly with the bolt.

   Torque: 11.3 N.m (115 kgf.cm, 9 ft.lbf) 

4. Connect the connector.

Fig 1: Removing Clip And Driven Gear

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Torque: 7.0 N.m (71 kgf.cm, 62 in..lbf)