FixVault
Home › Toyota › 2004 › Corolla S, Standard › Repair and Diagnosis › External Pages › Different car › Section 367 (Body Control Systems - Diagnostics) › Circuit Inspection › O/D Main Switch Circuit › Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2004 Toyota Celica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check O/D main switch (See  O/D MAIN SWITCH & O/D OFF INDICATOR LIGHT CIRCUIT  ,  CIRCUIT INSPECTION  ). 
    1. NG : Replace the O/D main switch. 
    2. OK : Go to next step. 
  2. Check wire harness and connector between O/D main switch and body ECU (See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  ). 
    1. NG : Repair or replace wire harness or connector. 
    2. OK : Proceed to next circuit inspection shown on problem symptoms table (See  PROBLEM SYMPTOMS TABLE  ). 
About FixVault