Disassembly and Assembly: Assembly

WARNING: This page is about a different car, the 2013 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Assembly is in the reverse order of disassembly.

Install new tamper resistant self-shear type screws.
CAUTION: Any time the ignition switch has been disconnected, removed and installed, the keys must be re-registered in the BCM. Refer to the CONSULT Immobilizer mode and follow the on-screen instructions.

Fig 1: Installing Tamper Resistant Self-Shear Type Screws
Courtesy of NISSAN NORTH AMERICA, INC.