Inspection Procedure
- INSPECT RADIO RECEIVER ASSY (B, ACC, E)
- Check that the continuity between terminals at each condition as shown in
Fig 1.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard:
TESTER CONNECTION SPECIFIED CONDITIONTester connection Condition Specified condition E - Body ground Constant Continuity - Check that the voltage between terminals at each condition as shown in
TESTER CONNECTION SPECIFIED CONDITION table.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard:
TESTER CONNECTION SPECIFIED CONDITIONTester connection Condition Specified condition B - E Constant 10 - 14 V ACC - E Ignition switch ACC or ON 10 - 14 V
- NG: Repair Or Replace Harness Or Connector
- OK: Check And Replace Radio Receiver Assy
- Check that the continuity between terminals at each condition as shown in
Fig 1.