Section 1004 (Stop Lamp System): Removal

WARNING: This page is about a different car, the 2004 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.

w/o Spoiler:
REMOVE HI-MOUNTED STOP LIGHT ASSEMBLY

HINT:

Installation is in the reverse order of removal. Only if there is a specified procedure for installation it is shown.
1. Insert the clip remover in the position as shown in Fig 1 , pull it upwards, and disconnect the engagement of the 2 front claws.
  
  Fig 1: Inserting Clip Removing In Position & Disconnecting Engagement Of Front Claws (W/O Spoiler)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Pull the center stop light assembly in the direction as shown in Fig 2 , and disconnect the engagement of 4 claws.
  
  Fig 2: Pulling Center Stop Light Assembly (W/O Spoiler)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Separate the connector, and remove the center stop light assembly.
w/o Spoiler:
REMOVE HI-MOUNTED STOP LIGHT BULB

HINT:

Installation is in the reverse order of removal. Only if there is a specified procedure for installation it is shown.
1. Remove center stop light assembly.
2. Remove the bulb sockets and bulbs.
Fig 3: Removing Hi-Mounted Stop Light Bulb (W/O Spoiler)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002