FixVault
Home › Toyota › 2004 › Matrix Base, 4WD › Repair and Diagnosis › External Pages › Different car › Section 1037 (Wiper System & Washer System) › Wiper Rubber › Replacement

Wiper Rubber: Replacement

WARNING: This page is about a different car, the 2004 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT WIPER BLADE 
    1. Remove the front wiper blade from the front wiper arm.
    NOTE: Do not fold down the front wiper arm with the front wiper blade removed from it.
  2. REMOVE WIPER RUBBER 
    1. Remove the wiper rubber from the front wiper blade.
  3. INSTALL WIPER RUBBER 
    1. Install the wiper rubber so that the head part (larger side) of the wiper rubber faces the arm axle side.
    Fig 1: Installing Wiper Rubber
    G00932879Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    NOTE: Push the front wiper blade into the grooves of the wiper rubber to engage them completely.
About FixVault