Combination Switch: Installation
WARNING: This page is about a different car, the 2003 Lexus GS 430, 2003 Lexus GS 300, 2002 Lexus GS 430, and 2002 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
During installation, if spiral cable mating mark is not properly aligned, steering wheel may not turn completely, or flat cable inside spiral cable may be severed, disabling SRS.
Ensure front wheels are in straight-ahead position. Install combination switch. Turn spiral cable counterclockwise until it stops. Turn spiral cable clockwise about 3 turns until colored mating mark is aligned. See Fig 1. Connect the air bag connector. Connect the 4 connectors. To complete installation, reverse removal procedure.