FixVault
Home › Toyota › 2004 › Matrix Base, 4WD › Repair and Diagnosis › External Pages › Different car › Section 183 (Anti-Lock) › Removal & Installation › Wheel Speed Sensor (Front) › Installation

Wheel Speed Sensor (Front): Installation

WARNING: This page is about a different car, the 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse removal procedure. Tighten front wheel speed sensor bolt to specification. See TORQUE SPECIFICATIONS .
  2. Install resin clip and 2 clamp bolts holding sensor harness to body. Tighten bolts to specification. See TORQUE SPECIFICATIONS .
  3. Connect speed sensor harness connector.
  4. Install front fender liner, engine under cover and front wheel. Tighten lug nuts to specification. See TORQUE SPECIFICATIONS .
  5. Check ABS speed sensor signal. See SPEED SENSOR SIGNAL CHECK  under COMPONENT TESTS.
About FixVault