FixVault
Home › Toyota › 2004 › Matrix Base, 4WD › Repair and Diagnosis › External Pages › Different car › Section 484 (Body Control Systems - Diagnostics) › Circuit Inspection › Door Lock Control Switch Circuit › Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2004 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check door lock control switch (See  INSPECTION  ). 
    1. NG : Replace door lock control switch. 
    2. OK : Go to next step. 
  2. Check for harness and connector between door lock control switch and passenger side J/B ECU (See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  ). 
    1. NG : Repair or replace harness and connector. 
    2. OK : Go to next step. 
  3. Check for harness and connector between door lock control switch and power window master switch. 
    1. NG : Repair or replace harness and connector. 
    2. OK : Proceed to next circuit inspection shown in problem symptoms table (See  PROBLEM SYMPTOMS TABLE   ). 
About FixVault