Timing Chain: Replacement

WARNING: This page is about a different car, the 2004 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

REPLACE CRANKSHAFT FRONT OIL SEAL

HINT:

There are 2 methods (( a) and ( b)) to replace the oil seal.

If the timing chain cover is removed from the cylinder head and block.
1. Using a screwdriver and a hammer, tap out the oil seal.
  
  Fig 1: Tapping Out Oil Seal
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using SST and a hammer, tap in a new oil seal until its surface is flush with the timing chain cover edge.
  SST 09309-37010
  
  Fig 2: Tapping In Oil Seal
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Apply MP grease to the oil seal lip.
If the timing chain cover is installed to the cylinder head and block.
1. Using SST, remove the oil seal.
  SST 09308-10010, 09950-60010 (09951-00200)
  
  Fig 3: Removing Oil Seal
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using SST and a hammer, tap in a new oil seal until its surface is flush with the timing chain cover edge.
  SST 09309-37010
  
  Fig 4: Tapping In Oil Seal
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002