FixVault
Home › Toyota › 2004 › Matrix Base, 4WD › Repair and Diagnosis › External Pages › Different car › Section 794 (Automatic Transmission) › Floor Shift Assembly › Installation

Floor Shift Assembly: Installation

WARNING: This page is about a different car, the 2004 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FLOOR SHIFT LEVER ASSEMBLY 
    1. Connect the 2 connectors to the floor shift lever assembly.
    2. Install the floor shift lever assembly with the 4 bolts.
      1. Torque: 8.3 N.m (85 kgf.cm, 73 in.lbf) 
      3. Fig 1: Installing Floor Shift Lever Assembly
      G00894523Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL CONSOLE BOX ASSEMBLY (See  INSTALLATION  ) 
    1. Install the console box assembly.
    2. Install the parking brake hole cover assembly.
    3. Install the box bottom mat.
    4. Install the console upper panel.
  3. INSTALL NO. 1 FLOOR SHIFT GEAR SHIFTING ROD 
    1. Shift into the N position.
    2. Connect the No. 1 floor shift gear shifting rod and connecting rod swivel with the nut.
      1. Torque: 13 N.m (130 kgf.cm, 9 ft.lbf) 
  4. CHECK SHIFTING LEVER POSITION (See  PRE-CHECK  ) 
    Fig 2: Installing No. 1 Floor Shift Gear Shifting Rod
    G00894524Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault