Instrument Panel Switch Pod: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.

Install the three retaining screws holding the switch pod to the cluster bezel.
Install the cluster bezel (Refer to CLUSTER BEZEL ).
WARNING: DO NOT CONNECT THE BATTERY NEGATIVE CABLE. (Refer to AIR BAG RESTRAINT SYSTEMS ) FIRST.

Fig 1: Removing Retaining Screws Holding Switch Pod To Cluster Bezel
Courtesy of DAIMLERCHRYSLER CORP.
Verify vehicle and system operation.