Up/Down and Left/Right
WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the hinge to liftgate bolts (Figure ).
- Loosen the striker screws (Figure ).
- Adjust the liftgate up/down position. Tighten bolts to 33 N.m (24 ft. lbs.) torque. (Refer to GAP AND FLUSH )
- Confirm the lower liftgate in/out position. Tighten screws to 28 N.m (21 ft. lbs.) torque.