FixVault
Home › Toyota › 2004 › Matrix Base, FWD, Automatic › Repair and Diagnosis › External Pages › Different car › Section 936 (Audio System & Video System) › Antenna Cable › Installation

Antenna Cable: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position antenna cable in vehicle.
  2. Install antenna cable to roof panel.
  3. Connect electrical harness connector and antenna to antenna module.
  4. Route cable under instrument panel. Connect electrical harness connector and antenna cable to instrument panel cable and connector.
  5. Install headliner (Refer to HEADLINER ).
  6. Install A-pillar trim (Refer to A-PILLAR TRIM ).
  7. Connect battery negative cable.
About FixVault