FixVault
Home › Toyota › 2004 › Matrix Base, FWD, Automatic › Repair and Diagnosis › External Pages › Different car › Section 969 (Instrument Panel) › Instrument Panel Center Bezel › Installation

Instrument Panel Center Bezel: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place instrument panel center bezel(s) right and left side into position (Figure ).
  2. Apply pressure on instrument panel center bezel right and/or left side to engage the locking tabs.
  3. Install ignition switch bezel.
About FixVault