FixVault
Home › Toyota › 2004 › Matrix Base, FWD, Automatic › Repair and Diagnosis › External Pages › Different car › Section 972 (Seat System) › Seat Armrest › Installation

Seat Armrest: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place armrest in position on seat back.
  2. Install bolt attaching armrest to seat back. Tighten bolt to 29 N.m (21 ft. lbs.) torque.
  3. Install side cap into the side of the armrest.
About FixVault