FixVault
Home › Toyota › 2004 › Matrix Base, FWD, Standard › Repair and Diagnosis › External Pages › Different car › Section 723 (Engine Ignition System (3MZ-FE)) › VVT Sensor › Replacement

VVT Sensor: Replacement

WARNING: This page is about a different car, the 2004 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE AIR CLEANER INLET ASSY 
  2. REMOVE AIR CLEANER ASSY (See  REPLACEMENT  ) 
  3. REMOVE VVT SENSOR 
    1. Disconnect the sensor connector.
    2. Remove the bolt and sensor.
      Fig 1: Removing VVT Sensor
      G02590110Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL VVT SENSOR 
    1. Apply a light coat of engine oil to the O-ring on the sensor.
    2. Install the sensor with the bolt.

      Torque:  8.0 N.m (82 kgf.cm, 71 in.lbf)

    3. Connect the sensor connector.
  5. INSTALL AIR CLEANER ASSY (See  REPLACEMENT  ) 
  6. INSTALL AIR CLEANER INLET ASSY 
  7. CHECK CONNECTION OF VACUUM HOSE 
About FixVault