FixVault
Home › Toyota › 2004 › Matrix Base, FWD, Standard › Repair and Diagnosis › External Pages › Different car › Section 936 (Audio System & Video System) › Radio › Installation

Section 936 (Audio System & Video System): Radio: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect wire harness connector and antenna cable to back of radio.
  2. Position radio into instrument panel.
  3. Install mounting screws. Tighten to 2 N.m (22 in. lbs.).
  4. Install instrument panel center bezel (Refer to INSTRUMENT PANEL CENTER BEZEL ).
  5. Connect battery negative cable.
About FixVault