FixVault
Home › Toyota › 2004 › Matrix Base, FWD, Standard › Repair and Diagnosis › External Pages › Different car › Section 948 (Power Seat System) › Driver Power Seat Track › Removal

Driver Power Seat Track: Removal

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the drivers seat from the vehicle and place it on a clean work surface (Refer to SEATS ).
  2. Remove the memory heated seat adjustable pedal module retaining screws.
  3. Disconnect the module electrical connectors and remove the module from the power seat track.
  4. Remove the rear fabric blocker trim panel from the rear of the front seat.
  5. Remove the seat side cover assembly (Refer to SEATS ).
  6. Disconnect all electrical connectors connecting the power seat track to the seat assembly.
  7. Pull the seat back trim cover up slightly to access and remove the two seat back frame mounting bolts and also remove two seat back recliner bolts.
  8. Remove four seat track mounting bolts from the seat cushion pan.
  9. Remove the power seat track from the seat.
About FixVault