FixVault

With Hand-Held Tester

WARNING: This page is about a different car, the 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect hand-held tester to (DLC3). See Figure.
  2. Start engine and check that ABS warning light flashes. If ABS warning light does not flash, inspect the ABS warning light circuit. See TEST B: ABS WARNING LIGHT CIRCUIT  under SYMPTOM TESTING.
  3. Drive vehicle straight forward at speed of 28 mph or more for several seconds.
  4. Stop vehicle. Read DTC by following prompts on the tester screen. Refer to the hand-held tester operator's manual for further details. If any DTCs are retrieved, perform appropriate test. See DIAGNOSTIC TROUBLE CODE DEFINITIONS .