FixVault
Home › Toyota › 2004 › Matrix XRS › Repair and Diagnosis › External Pages › Different car › Section 776 (Body Control System - Diagnosis) › Circuit Inspection › Power Window Switch Circuit › Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2004 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the power window switch (See  INSPECTION  ) 
    1. NG: Replace the power window switch. 
    2. OK: Go to next step. 
  2. Check wire harness and connector between power window switch and boby 
    1. NG: Repair or replace wire harness or connector. 
    2. OK: Go to next step. 
  3. Check wire harness and connector between power window switch and body 
    1. NG: Repair or replace wire harness or connector. 
    2. OK: Go to next step. 

      Proceed to next circuit inspection shown on problem symptoms table (See  PROBLEM SYMPTOMS TABLE  ). 

About FixVault