Specifications & Procedures

Loosen tension pulley lock nut. Loosen drive belt tension by adjusting bolt and remove belt. To install belt, see Fig 1 for proper drive belt routing pattern. Tighten drive belt tension by adjusting bolt. See BELT ADJUSTMENT - Tension In Lbs. (Kg) Using Belt Tension Gauge table. Tighten tension pulley lock nut to 30 ft. lbs. (40 Nm).

BELT ADJUSTMENT - Tension In Lbs. (Kg) Using Belt Tension Gauge

Application

New Belt

⁽¹⁾ Used Belt

Water Pump

88-132 (40-60)

44-88 (20-40)

⁽¹⁾	Used belt is a belt in operation at least 5 minutes.

DRIVE BELT ROUTING

For serpentine drive belt routing, see Fig 1.

Fig 1: Drive Belt