FixVault
Home › Toyota › 2004 › RAV4 Base, AWD, Automatic › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Body Control Systems - Diagnostics › Circuit Inspection › Door Lock Motor Circuit › Inspection Procedure

Inspection Procedure

  1. Check door lock motor (See  INSPECTION  ). 
    1. NG : Replace door lock motor. 
    2. OK : Go to next step. 
  2. Check for harness and connector between door lock motor and passenger side J/B ECU. 
    1. NG : Repair or replace harness and connector. 
    2. OK : Proceed to next circuit inspection shown in problem symptoms table (See  PROBLEM SYMPTOMS TABLE   ). 
About FixVault