FixVault
Home › Toyota › 2004 › RAV4 Base, AWD, Automatic › Repair and Diagnosis › Engine Mechanical › Lubrication System › Engine Lubrication System › Oil Pump › Reassembly

Oil Pump: Reassembly

  1. INSTALL OIL PUMP BODY COVER 

    Install the pump body cover with the 5 bolts.

    Torque: 8.8 N.m (90 kgf.cm, 78 in.lbf) 

    Fig 1: Installing Oil Pump Body Cover With Bolts
    G02925755Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL RELIEF VALVE 
    1. Coat the relief valve with engine oil.
    2. Insert the relief valve and spring into the pump body hole.
      3. Fig 2: Installing Relief Valve & Spring
      G02925756Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Using a socket wrench (27 mm), install the plug.

      Torque: 49 N.m (500 kgf.cm, 36 ft.lbf) 

  3. INSTALL OIL PUMP STRAINER SET 
    1. Place a new gasket on the oil pump.
    2. Install the oil strainer with the 2 nuts.

      Torque: 8.8 N.m (90 kgf.cm, 78 in.lbf) 

      Fig 3: Installing Oil Pump Strainer & Nuts
      G02925757Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault