FixVault
Home › Toyota › 2004 › RAV4 Base, AWD, Standard › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Body Control Systems - Diagnostics › Circuit Inspection › Power Main Relay Circuit › Inspection Procedure

Inspection Procedure

  1. Check power main relay (Marking: POWER) (See  INSPECTION  ). 
    1. NG : Replace power main relay. 
    2. OK : Go to next step. 
  2. Check for harness and connector between power main relay (Marking: POWER) and passenger side ECU, and battery and power main relay. 
    1. NG : Repair or replace harness and connector. 
    2. OK : Proceed to next circuit inspection shown in problem symptoms table (See  PROBLEM SYMPTOMS TABLE   ). 
About FixVault