FixVault
Home › Toyota › 2004 › RAV4 Base, AWD, Standard › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Body Control Systems - Diagnostics › Circuit Inspection › Taillight Relay Circuit › Inspection Procedure

Inspection Procedure

  1. Check taillight relay (See  INSPECTION  ). 
    1. NG : Replace taillight relay. 
    2. OK : Go to next step. 
  2. Check for harness and connector between taillight relay and passenger side J/B ECU, and battery and taillight relay (See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  ). 
    1. NG : Repair or replace harness and connector. 
    2. OK : Proceed to next circuit inspection shown in problem symptoms table (See  PROBLEM SYMPTOMS TABLE   ). 
About FixVault