Inspection Procedure

Check the power window master switch using TOYOTA hand-held tester.
PREPARATION:

Connect the TOYOTA hand-held tester to the DLC3.

CHECK:

Check the power window master switch using DATA LIST.

OK:

Fig 1: Driver Side Power Window Specification Table
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Passenger Side Power Window Specification Table
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. OK: Proceed to next circuit inspection shown on problem symptoms table (See PROBLEM SYMPTOMS TABLE ).
2. NG: Replace the driver door ECU.