FixVault
Home › Toyota › 2004 › Tacoma S-Runner › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Body Control Systems - Diagnostics › Circuit Inspection › Door Lock Control Switch Circuit › Inspection Procedure

Inspection Procedure

  1. Check Door Lock Control Switch. See  CHECK DOOR LOCK CONTROL SWITCH  . 
    1. NG: Replace door lock control switch. 
    2. OK: Go to next step. 
  2. Check wire harness and connector between door lock control switch and body ECU. See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  . 
    1. NG: Repair or replace harness or connector. 
    2. OK: Go to next step. 
  3. Check harness and connector between door lock control switch and power window master switch. 
    1. NG: Repair or replace harness or connector. 
    2. OK: Proceed to next circuit inspection shown in  PROBLEM SYMPTOMS TABLE  . 
About FixVault