Abs Actuator: Disassembly

DISCONNECT CONNECTOR
1. Remove the screw and clamp from the ABS actuator.
  Torque: 2.9 N.m (30 kgf.cm, 26 in.lbf)
2. Disconnect the connector.
REMOVE ABS ECU
Using a hexagon wrench (4 mm), remove the 4 bolts and ABS ECU.

Torque: 4.4 N.m (45 kgf.cm, 39 in.lbf)

NOTE: Protect the actuator in order to prevent sealing surface from getting dirty and causing damage on the valve body. If the dirt and the like is stuck to the sealing surface, use plastic tools or soft objects to remove the dirt. Do not use chemical solvents.

Fig 1: Identifying Valve Body Sealing Surface
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002