FixVault
Home › Toyota › 2004 › Tundra Base, Standard › Repair and Diagnosis › Engine Performance › System › Crankshaft Position Sensor (5VZ-FE) › Installation

Crankshaft Position Sensor (5VZ-FE): Installation

  1. INSTALL CRANKSHAFT POSITION SENSOR 
    1. Install the crankshaft position sensor with the bolt.

      Torque: 8 N.m (80 kgf.cm, 70 in.lbf) 

    2. Connect the crankshaft position sensor connector.
  2. INSTALL ENGINE UNDER COVER 
    Fig 1: Installing Crankshaft Position Sensor
    G02930744Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault