Customize Parameters

HINT:

The following items can be customized.

NOTE:

After confirming whether the items requested by the customer are applicable or not for customization, perform customize operations.
Be sure to record the current settings before customizing.
When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization.

BODY ECU (Using hand-held tester):

CUSTOMIZATION (BODY ECU)

Display (Item)	Default	Contents	Setting
Auto Lock	OFF	Function that locks the doors once when the vehicle speed reaches a certain level.	ON/OFF
Unlk/Key Twice	ON	Function that unlocks only driver side door when driver side door key cylinder is turned to unlock once and unlocks all the doors when it is turned to unlock twice.	ON/OFF
UnlkKey Twice	ON	In OFF setting, turning it once unlocks all doors.	ON/OFF
All Unlk/Opn-Cl	ON		ON/OFF
Unlock/Park	OFF	Function that unlocks doors when lever is shifted to P position from any position other than P while the ignition switch is ON.	ON/OFF

MANUAL SETTING (Switch operation)
1. Close all the doors.
2. Turn the ignition switch on (IG).
3. Within ten seconds after the ignition switch on (IG).
  - To set function (Shift-linked Automatic Door Lock)
    Push and hold the LOCK side of the power door lock switch for five seconds with the sift lever in the P.
  - To set function (Speed-sensitive Automatic Door Lock)
    Push and hold the LOCK side of the power door lock switch for five seconds with the sift lever in any position except P.
  - To set function (Shift-linked Automatic Door Unlock)
    Push and hold the UNLOCK side of the power door lock switch for five seconds with the shift lever in the P.
  - To set function (Opening Driver's Door-linked Automatic Door Unlock)
    Push and hold the UNLOCK side of the power door lock switch for five seconds with the shift lever in any position except P.
If user wants to cancel a function, repeat the procedure. Each time user perform the procedure, the function is set or cancelled.