How To Proceed With Troubleshooting

HINT:

Use these procedures to troubleshoot the power window control system (convertible).

1. VEHICLE BROUGHT TO WORKSHOP 
2. CUSTOMER PROBLEM ANALYSIS CHECK   AND SYMPTOM CHECK) 
3. PROBLEM SYMPTOMS TABLE   ) 
   1. If the fault is not listed on the problem symptoms table, proceed to A.
   2. If the fault is listed on the problem symptoms table, proceed to B.

   B: Go to step 5 

   A: Go to next step. 

4. OVERALL ANALYSIS AND TROUBLESHOOTING 
   1. TERMINALS OF ECU  )
   2. ON-VEHICLE INSPECTION  )
   3. INSPECTION  )
5. ADJUST, REPAIR OR REPLACE 
6. CONFIRMATION TEST 

END