Torque Specifications
Power Steering Torque Specifications
| Part tightened | N.m | kgf.cm | ft.lbf | ||
|---|---|---|---|---|---|
| VANE PUMP ASSY (2AZ-FE) | |||||
| Housing rear x Housing front | 22 | 224 | 16 | ||
| Oil pressure switch | 21 | 214 | 16 | ||
| Pressure port union | 69 | 704 | 51 | ||
| Suction port union set bolt | 12 | 122 | 9 | ||
| Pump assy set bolt | Bolt A | 26 (37) | 264 (377) | 19 (27) | |
| Bolt B | 37 | 377 | 27 | ||
| Pressure feed tube assy set union bolt | 52 | 525 | 38 | ||
| VANE PUMP ASSY (3MZ-FE) | |||||
| Pump bracket front x Housing front | 44 | 449 | 32 | ||
| Housing rear x Housing front | 24 | 245 | 18 | ||
| Pump bracket rear x Housing rear | 44 | 449 | 32 | ||
| Pressure port union | 83 | 846 | 61 | ||
| Suction port union set bolt | 13 | 133 | 10 | ||
| Pump assy set bolt | 43 | 440 | 32 | ||
| Pressure feed tube assy set union bolt | 52 | 525 | 38 | ||
| Oil pressure switch | 21 | 214 | 15 | ||
| RACK & PINION POWER STEERING GEAR ASSY | |||||
| Control valve housing set bolt | 20 | 204 | 15 | ||
| Control valve shaft lock nut | 25 | 250 | 18 | ||
| Rack housing cap | 59 | 597 | 43 | ||
| Rack guide spring cap lock nut | 51 (69) | 520 (699) | 38 (51) | ||
| Rack x Rack end sub-assy | 60 (84) | 615 (851) | 45 (62) | ||
| Tie rod assy lock nut | 74 | 755 | 55 | ||
| Turn pressure tube union nut | 11 (13) | 113 (127) | 8 (9) | ||
| Steering gear assy set bolt | 70 | 714 | 52 | ||
| Pressure feed tube assy union nut | 22 (25) | 227 (250) | 16 (18) | ||
| Pressure feed tube clamp set bolt | 9.8 | 100 | 87 in..lbf | ||
| Pressure feed tube clamp set nut | 9.8 | 100 | 87 in..lbf | ||
| Stabilizer bracket No.1 x Suspension crossmember | 19 | 194 | 14 | ||
| Intermediate shaft assy x Steering gear assy | 35 | 360 | 26 | ||
| ( ): For use without SST | |||||