Upper Back Door: Adjustment

Loosen the door side hinge bolts to adjust.

Torque: 28 N.m (286 kgf.cm, 21 ft.lbf) 

Fig 1: Adjusting Door In Left/Right And Vertical Directions

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Loosen the body side hinge nuts to adjust.

Torque: 31 N.m (316 kgf.cm, 23 ft.lbf) 

Fig 2: Adjusting Door In Forward/Rearward And Vertical Directions

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Check that the door fit and door linkages are adjusted correctly.
2. Using a Torx wrench, loosen the door lock striker mounting screws.

   Torx wrench: T40 (Part No. 09042-00020 or locally manufactured tool) 

   Torque: 11.5 N.m (117 kgf.cm, 8 ft.lbf) 

3. Using a plastic hammer, tap the door lock striker to adjust.
   Fig 3: Tapping Door Lock Striker To Adjust

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Loosen the stopper mounting bolt to adjust.
2. Use the same manner described above to the other side.
   Fig 4: Adjusting Lower Stopper

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002