Shift Lock System: Inspection

1. Remove the shift lock ECU (See DISASSEMBLY  ).
2. Using an ohmmeter, check the resistance between the terminals 2 and 4.

   Standard: Below 1Ω 

If the result is not as specified, replace the shift lock ECU.

Fig 1: Checking Resistance Between Terminals 2 And 4 Using An Ohmmeter

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the shift lock solenoid (See DISASSEMBLY  ).
2. Inspect the shift lock solenoid operation.
   1. Using an ohmmeter, check the resistance between the terminals.

      Standard: Below 1Ω 

      If the result is not as specified, replace the shift lock solenoid.

      Fig 2: Checking Resistance Between Terminals Using An Ohmmeter

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Check the solenoid operating sound when connecting the battery voltage across the terminals.

   If the solenoid does not operate, replace the shift lock solenoid.

   Fig 3: Connecting Battery Voltage To Terminals

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002