FixVault
Home › Toyota › 2005 › Prius › Repair and Diagnosis › Body & Frame › Windows › Power Window - Diagnostics › Auto Up Operation Does Not Fully Close Power Window (Jam Protection Function Is Activated) › Inspection Procedure

Inspection Procedure

  1. RESET POWER WINDOW REGULATOR MOTOR FRONT LH (DRIVER SIDE) 
    1. Reset the power window regulator motor (SEE INITIALIZATION  ).
    2. Check that the power window AUTO UP/DOWN function operates normally.

      OK: AUTO UP/DOWN function operates normally. 

    1. NG: Go to step 2 
    2. OK 

      END 

  2. CHECK POWER WINDOW REGULATOR ASSY LH 
    1. Remove the door glass (SEE REPLACEMENT ).
    2. Operate the front door window regulator using the switch.
    3. Check that the power window regulator operates smoothly.

      OK: Power window regulator operates smoothly. 

    1. NG: REPLACE POWER WINDOW REGULATOR ASSY LH 
    2. OK 

      REPLACE DOOR GLASS RUN 

About FixVault